Fixed Gas Detection Systems

Zensory.ai™ uses multi-sensor fusion — high-resolution cameras, Long-Wave Infrared Optical Gas Imaging, and acoustic anomaly AI — to continuously scan wellsites. The platform's AI Site Learning establishes a normal operational baseline in about 2 days, then flags deviations indicating fugitive methane or VOC leaks with high accuracy and minimal false alarms.

The platform operates as a three-tier architecture. Zentinal Ops™ provides visual and acoustic equipment intelligence through high-resolution video, object recognition, and acoustic anomaly detection. Zentinal Core™ is the multi-sensor detection layer that identifies fugitive emissions and filters out false alarms using full-spectrum video, audio, and IR with AI-driven false-alarm-elimination intelligence, supporting OGMP 2.0 Level 3. Zentinal IQ™ activates only after Core validates an event, quantifying emissions volume, duration, and rate to produce high-accuracy methane quantification and regulatory-ready reporting for EPA and ESG reporting.

Field installation and commissioning typically take about 2 days per site, during which the AI Site Learning process establishes the site's normal operational baseline. This rapid setup allows the system to begin autonomous monitoring quickly, with re-learning triggered automatically if site configurations change.

Continuous fixed monitoring systems like Zentinal Core™ and Zentinal IQ™ provide 24/7 coverage between scheduled Leak Detection and Repair (LDAR) inspections, producing complete emissions records rather than point-in-time snapshots and enabling faster response to leaks, often within 24 hours of detection. Whether continuous monitoring can substitute for a required periodic inspection depends on the EPA and state requirements applicable to each site.

Yes. Zentinal IQ™ produces defensible-accuracy methane quantification structured for EPA methane rule submissions (40 CFR Part 60 Subpart OOOOb), OGMP 2.0 Level 4/5 frameworks, and SASB/TCFD ESG disclosures, giving operators audit-ready compliance logs and trend analysis reports.

No. These systems use onsite edge computing to process and store data locally, allowing fully autonomous operation even at remote sites with limited or intermittent connectivity. Data automatically synchronizes to the network and dashboard once a connection is available, ensuring no monitoring gaps occur.